SUP AIR 23238 FFP2+org. Vapours Particulate Respirator with Valve

SUP AIR 23238 FFP2+org. Vapours Particulate Respirator with Valve. FFP2 half-mask made of non-woven polypropylene with exhalation valve that reduces heat build-up inside the mask. The activated carbon layer provides relief against nuisance odours. Latex free synthetic rubber and aluminum adjustable nose clip with PU foam nose pad helps to provide a comfortable fit across a broad range of face shapes. For occasional use in a very dusty environment. Protections against low toxic solid and liquid aerosols, such as woods, mineral oils, kaolin, cement, cotton, sulfur, flour, coal, iron and metal.

Complies with EN 149 filtered half mask and respirator standard for protection against particles. Click HERE to read how to choose a respirator.

• EN 149:2001 + A1:2009
• FFP2
• Weight 17 g
• Material: Non-woven polypropylene with active carbon

Using a dust mask: place the mask on your face as instructed and check the tightness before entering the dusty area. Avoid removing the dust mask from your face in a dusty room. The dust mask has been used to the end of its life cycle and must be discarded if it is removed from the face in a dusty room; there is breathing difficulty and discomfort due to dust mask blockage; the dust mask is mechanically damaged. The dust mask may be used for a maximum of one shift.

Warnings. SUP AIR 23238 FFP2 respirator with exhalation valve does not protect the wearer from gases or vapours. A gas respirator should be used to protect against gases and vapours. Dust masks must not be used in environments where the oxygen content of the air is less than 17%, the composition or concentration of the dust is unknown or the dust is life-threatening. The wearer of the mask must not have a beard or moustache that would affect the effectiveness of the mask.

To check suitability, always proceed as follows before using a dust mask. Carefully cover the front of the dust mask with both hands so that you do not move it out of position. In the case of a CLAPPING dust mask, breathe deeply IN. If air leaks from around the nose, readjust the nose clip to eliminate the leak. If air leaks from the sides of the respirator, adjust the position of the straps to eliminate the leak. If you do not achieve proper tightness, do not enter the hazardous area.

Sup Air is part of the Coverguard® group, which is a major stakeholder in the worldwide Personal Protective Equipment (PPE) market. Coverguard designs, manufactures and distributes a comprehensive range of unique, original, comfortable and reliable protective equipment. Sup Air respirators are durable, comfortable and protect against dusts, vapours and other hazardous environments.