SUP AIR 23306 FFP3S Particulate Respirator with Valve

For occasional use in a very dusty environment. Protections against non- toxic solid (up to 50 x LPN) and liquid aerosols, such as calcium carbonate, kaolin, cement, cellulose, sulfur, cotton, flour, coal, ferrous metals, vegetable oils and tender woods.

Complies with EN 149 filtered half mask and respirator standard for protection against particles. Click HERE to read how to choose a respirator.

• EN 149:2001
• FFP3
• Weight 18 g

Using a dust mask: place the mask on your face as instructed and check the tightness before entering the dusty area. Avoid removing the dust mask from your face in a dusty room. The dust mask has been used to the end of its life cycle and must be discarded if it is removed from the face in a dusty room; there is breathing difficulty and discomfort due to dust mask blockage; the dust mask is mechanically damaged. The dust mask may be used for a maximum of one shift.

Warnings. SUP AIR 23306 FFP3S respirator with exhalation valve does not protect the wearer from gases or vapours. A gas respirator should be used to protect against gases and vapours. Dust masks must not be used in environments where the oxygen content of the air is less than 17%, the composition or concentration of the dust is unknown or the dust is life-threatening. The wearer of the mask must not have a beard or moustache that would affect the effectiveness of the mask.

To check suitability, always proceed as follows before using a dust mask. Carefully cover the front of the dust mask with both hands so that you do not move it out of position. In the case of a CLAPPING dust mask, breathe deeply IN. If air leaks from around the nose, readjust the nose clip to eliminate the leak. If air leaks from the sides of the respirator, adjust the position of the straps to eliminate the leak. If you do not achieve proper tightness, do not enter the hazardous area.

Sup Air is part of the Coverguard® group, which is a major stakeholder in the worldwide Personal Protective Equipment (PPE) market. Coverguard designs, manufactures and distributes a comprehensive range of unique, original, comfortable and reliable protective equipment. Sup Air respirators are durable, comfortable and protect against dusts, vapours and other hazardous environments.